Heres the thing I have 86 fc3s, I want to know how much modification is need to straight bolt up a hood, headlights, fenders, front bumper cover to my 86 frame without cutting the hole clip off welding a new frame on. Is this at all possible?undefinedundefined

 

That's stupid... Might as well buy a FD (make sure you don't turn it into a skyline wannabe with supra taillights).

 

the best way is to tune up your FC and

1.back it up against a wall and pull e-brake really hard.
2. have a friend let you borrow his/her FD
3. mark 100' in front of the FC
4. put FD in reverse and slam in the front of the FC.
5. get a buffer and beging to buff out the potential scratches you caused.


I know another member is using the panels, hood, and front bumper on h is FC but you have to cut and weld and custom fab crap to make it work. If you wanted an FD you should have saved a tad longer to buy an FD.

and remember ANYTHING IS POSSIBLE WITH AN UNLIMITED BUDGET.

 

Looks like someone wants to copy the whole 180SX S15 conversion thing... not gonna happen with a seven, sorry.

 

 

LOL @ "frame"... It's a freaking unibody!

 

I say you do a silvia conversion to your fc lol

 

here is a pic of a fc w/fd front

 

It has been done in Japan.
It is not a simple bolt on. Requires new fenders, and probably new support brackets for both the front bumper and the hood.

 

radiator support too

 

Place in Melbourne (Australia) offering the swap/conversion from $3000($2500 US)
Pure rice IMO

But it is unique and does look good