in dash DVD won't play movies
#1
Rotary Enthusiast
Thread Starter
iTrader: (4)
Join Date: Sep 2003
Location: Yutan, Nebraska
Posts: 982
Likes: 0
Received 0 Likes
on
0 Posts
in dash DVD won't play movies
Okay, i got a BOSS9900B in dash dvd for free from a buddy. I hooked it up to my daily driver. I put a movie and and I can hear the sound perfect, but there is a message on the screen that says, "video disabled while driving for safety purposes" Is there a way around this? I am not even driving, i was just sitting with the power ON
Trev
Trev
#2
Okay, i got a BOSS9900B in dash dvd for free from a buddy. I hooked it up to my daily driver. I put a movie and and I can hear the sound perfect, but there is a message on the screen that says, "video disabled while driving for safety purposes" Is there a way around this? I am not even driving, i was just sitting with the power ON
Trev
Trev
#5
White chicks > *
iTrader: (33)
There is a wire from your unit that you have to splice into your e-brake.
This is to prevent you to NOT being able to watch movies while driving (hence the e-brake method).
E-brake up = you see video
E-brake down = no video
Ground that wire that is supposed to go to your e-brake and you will see video fulltime.
Trust me, i been through this before.
This is to prevent you to NOT being able to watch movies while driving (hence the e-brake method).
E-brake up = you see video
E-brake down = no video
Ground that wire that is supposed to go to your e-brake and you will see video fulltime.
Trust me, i been through this before.
Trending Topics
#8
On the fasttrack!
iTrader: (22)
or................like the pioneer headunits, it has a self grounding. no wires to hack into.
but, if it doesnt, then all you need to do is wire a switch inline with the deck, and voula, solved.
if it is like the pioneer n2 or n3, then you have to take it apart, find the ground solder and wire, cut a hole in the shell, then wire the switch.
peace
but, if it doesnt, then all you need to do is wire a switch inline with the deck, and voula, solved.
if it is like the pioneer n2 or n3, then you have to take it apart, find the ground solder and wire, cut a hole in the shell, then wire the switch.
peace
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM