Bodykit modefication!
#1
V8-TZR
Thread Starter
Join Date: Oct 2002
Location: Auckland NZ
Posts: 888
Likes: 0
Received 0 Likes
on
0 Posts
Bodykit modefication!
If you were to ask the body shop to cut the line off through the center of this bumper in the pic would it decrease the strength of the bumber at all ????
If anyone has a better pic of this kit could you post a few pics please...thanks.
If anyone has a better pic of this kit could you post a few pics please...thanks.
#2
Yellow Dragon is no more
Na ... The bumpers that have the support are strong. The copies that don't are really cheap--just ask rotaryextreme. I have a good copy of the Apex bumper and I'm planning on cutting it out so I can have full air flow over my Greddy FMIC.
#4
V8-TZR
Thread Starter
Join Date: Oct 2002
Location: Auckland NZ
Posts: 888
Likes: 0
Received 0 Likes
on
0 Posts
so i could get a replica...and cut it up, becasue that bumber would look sic with out that line through the middle.
Anyway..thanks guys, You wouldant hapen to have some sic pics of it would you ?
Anyway..thanks guys, You wouldant hapen to have some sic pics of it would you ?
#6
Yellow Dragon is no more
Pics without the bar are out there. I think the Supra7 CYM has it cut out. You should be able to find a replica for $300 in your side of the world. They are also easier to find overseas too--thats where they come from for us.
Trending Topics
#9
Senior Member
Join Date: Oct 2002
Location: South Florida
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
This is my current favorite bumper I think. No '99 lights, but other than that I love it...the bar doesn't bother me either.
The Apex'i original is actually not that expensive...but its not $300 either. Where do you see replicas for $300, and are they decent enough quality?
I really wish it were urethane, because I know if I ever get a fiberglass front end I'm going to crack the sh*t out of it within a month by pulling up to far in a parking space :-(
jds
The Apex'i original is actually not that expensive...but its not $300 either. Where do you see replicas for $300, and are they decent enough quality?
I really wish it were urethane, because I know if I ever get a fiberglass front end I'm going to crack the sh*t out of it within a month by pulling up to far in a parking space :-(
jds
Originally posted by ICE_Pilot
so i could get a replica...and cut it up, becasue that bumber would look sic with out that line through the middle.
Anyway..thanks guys, You wouldant hapen to have some sic pics of it would you ?
so i could get a replica...and cut it up, becasue that bumber would look sic with out that line through the middle.
Anyway..thanks guys, You wouldant hapen to have some sic pics of it would you ?
#10
Mr. Links
iTrader: (1)
Originally posted by ICE_Pilot
yea i know...we get all the stuff here cos Jap is like next door.
Supra7.....why call a FD a supra....crasy man...anyway where can i get that pic ?
yea i know...we get all the stuff here cos Jap is like next door.
Supra7.....why call a FD a supra....crasy man...anyway where can i get that pic ?
http://www.turbomagazine.com/features/0112tur_supra/
It's call a "Supra 7" because it uses the Supra's 2JZ-GTE engine.
#11
Yellow Dragon is no more
Originally posted by bureau_c
The Apex'i original is actually not that expensive...but its not $300 either. Where do you see replicas for $300, and are they decent enough quality?
The Apex'i original is actually not that expensive...but its not $300 either. Where do you see replicas for $300, and are they decent enough quality?
#12
Eats, Sleeps, Dreams Rotary
iTrader: (2)
Only one kind of replica
There is only one company that's in Hong Kong that makes the replica and there is only one version that I know of. The quality is not as good as all the other replica I manufacture because it's a little thin and the flange where it meets the fender needs a little body work such as sanding and bondoing.
I don't think I can post price here.
Chuck
I don't think I can post price here.
Chuck
#14
V8-TZR
Thread Starter
Join Date: Oct 2002
Location: Auckland NZ
Posts: 888
Likes: 0
Received 0 Likes
on
0 Posts
Instead of cutting out the middle line could you take out the piece just under the turn signals, The part that makes the outer circle of the headlights. So there would be 3 big holes, I think it would make it alot meaner.
Could anyone photoshop that for me please??
Could anyone photoshop that for me please??
#16
Senior Member
Join Date: Feb 2002
Location: Seattle / Bothell
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I really like that bumper, the only one I like more is the border type-4 because it has the 99 lights.
I also like the Type II Run Racing kit a lot, but I haven't been able to find anymore pics of it, anyone have any?
http://www.bozzperformance.com/jdm_m...ic_fd_aero.htm
http://www.bozzperformance.com/jdm_m...ic_fd_aero.htm
Thanks,
Jeff
I also like the Type II Run Racing kit a lot, but I haven't been able to find anymore pics of it, anyone have any?
http://www.bozzperformance.com/jdm_m...ic_fd_aero.htm
http://www.bozzperformance.com/jdm_m...ic_fd_aero.htm
Thanks,
Jeff
#17
V8-TZR
Thread Starter
Join Date: Oct 2002
Location: Auckland NZ
Posts: 888
Likes: 0
Received 0 Likes
on
0 Posts
Those are R magic bumpers if im not mistaken...ummm cos it says (R-Magic). Anyway I also love that Border type 4 front and i WISH SOME ONE WOULD POST SOME REALY SIC PICS OF IT!!!!!!!!!!!!. I like that front fender on that maroon 7 in those links Smilez, it dose something realy good to the shape of the car some how.
Now is some one going to tell me if those pics i posted are Titanium grey or not?
And where the hell do i get a Hood like this FD has????
Hmmmm dam thats sic!!!
Now is some one going to tell me if those pics i posted are Titanium grey or not?
And where the hell do i get a Hood like this FD has????
Hmmmm dam thats sic!!!
#19
Lurking..................
Join Date: Mar 2001
Location: PA
Posts: 2,220
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ICE_Pilot
And where the hell do i get a Hood like this FD has????
Hmmmm dam thats sic!!!
And where the hell do i get a Hood like this FD has????
Hmmmm dam thats sic!!!
That's the Run Racing hood, and those are R-Magic fenders you posted below it. REDTT on here has those fenders.
#21
T3DoW
iTrader: (10)
Run Racing:
http://www.pac-gate.co.jp/run/fd3s-1.htm
thats the site for anyone interested..few pics there too
and heres a couple more pics of the hood:
http://www.pac-gate.co.jp/run/fd3s-1.htm
thats the site for anyone interested..few pics there too
and heres a couple more pics of the hood:
Last edited by TpCpLaYa; 01-26-03 at 03:33 PM.
#25
Lurking..................
Join Date: Mar 2001
Location: PA
Posts: 2,220
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Smilez
Does anyone know wher you can buy the run racing lights from?
And that is the apexi kit on the red car right?
Thanks,
Jeff
Does anyone know wher you can buy the run racing lights from?
And that is the apexi kit on the red car right?
Thanks,
Jeff