Alarm Install
#1
Rotang Enthuesiest!
Thread Starter
Join Date: Aug 2004
Location: Victoria B.C. Canada
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Alarm Install
Seeing if anybody can help me *icemark*, or anyone who has ever installed and aftermarket alarm in a 7.
I aquired a very nice alarm system at christmas and im finally putting it in now that i have time and finals are over. I do not have much expierience in wiring and electronics but i do know the very basics lol.
Here is what the alarm has for wires:
All of the the red dots are wires i think i have figured out as from the advice in other threads *THREAD* . But i still am having difficulties...
My car is a 1988 Canada version GX *it does have the Factory alarm plug*
All of the wires with red dots beside them mean i think i have figure them out.
All of the wire with blue dots i have no f*cking clue.
All of the red lines thru are wires i do not think i need.
So....
Where do i find each of these wires, what colors and how do i connect them up to my alarm harness?
(I have installed aftermarket door lock solenoids)
As I have said before I have read the other thread and looked at the wiring colors and codes but to my dismay i cannot seem to find them on my car (could someone post a wiring diagram/ pic of where the wires go on the connector to CPU or elseware in the sytem)?
Any help will be greatly appreciated as I would like to getmy car back on the road ASAP!! ITS SUNNY OUT!!
Well thanks in advance!
Keith
I aquired a very nice alarm system at christmas and im finally putting it in now that i have time and finals are over. I do not have much expierience in wiring and electronics but i do know the very basics lol.
Here is what the alarm has for wires:
All of the the red dots are wires i think i have figured out as from the advice in other threads *THREAD* . But i still am having difficulties...
My car is a 1988 Canada version GX *it does have the Factory alarm plug*
All of the wires with red dots beside them mean i think i have figure them out.
All of the wire with blue dots i have no f*cking clue.
All of the red lines thru are wires i do not think i need.
So....
Where do i find each of these wires, what colors and how do i connect them up to my alarm harness?
(I have installed aftermarket door lock solenoids)
As I have said before I have read the other thread and looked at the wiring colors and codes but to my dismay i cannot seem to find them on my car (could someone post a wiring diagram/ pic of where the wires go on the connector to CPU or elseware in the sytem)?
Any help will be greatly appreciated as I would like to getmy car back on the road ASAP!! ITS SUNNY OUT!!
Well thanks in advance!
Keith
#2
Rotang Enthuesiest!
Thread Starter
Join Date: Aug 2004
Location: Victoria B.C. Canada
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
( I would like to have all the side marker lights and turn signals flash when the alarm is armed/disarmed) If no way possible i will settle for one or the other.
#4
Rotang Enthuesiest!
Thread Starter
Join Date: Aug 2004
Location: Victoria B.C. Canada
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Anyone? Calling the manufacturer sounds like a good idea but im pretty sure they only know how there alarm works and not rx-7's i know how the alarm works too basically, i just cant find the wires to connect it up proper
#5
What are those wires supposed to do? The manufacturer will tell you what your supposed to hook them too (mybe not the wire color) but specific function. I'm sure if you search you can find a wire diagram for your car online.
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM