aftermarket steering wheel: getting horn to work
#1
Senior Member
Thread Starter
iTrader: (6)
Join Date: Dec 2001
Location: Baltimore, MD
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
aftermarket steering wheel: getting horn to work
If anyone has had any problems with getting the horn to work on thier aftermarket steering wheel using the momo hub adaptor, i used a simple bracket and spring that will stay in place and make contact so that the horn wil work. i attatched some pics of what this looks like. i put the hub above it to show the back side, the spring rotates around the metal outer ring
#2
Senior Member
Join Date: Feb 2001
Location: West Covina, CA, USA
Posts: 418
Likes: 0
Received 0 Likes
on
0 Posts
that's a good idea! I just have the metal...the spring is pure genius hahahah
by the way, how did you get your dash to be all carbon fiber??? it doesn't look like a lay-over kit!
David
by the way, how did you get your dash to be all carbon fiber??? it doesn't look like a lay-over kit!
David
#3
Senior Member
Thread Starter
iTrader: (6)
Join Date: Dec 2001
Location: Baltimore, MD
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
beleive it or not its just a vinyl type sticker that goes over the stock panels, the kid i bought the car from actually put it on, I think he just took his time, and i think the key is to use water and soap on the surface before you lay down the sticker part, then you can slide the sticker around on the surface until its in the right place. it will stick just as well as if you hadent put anything on.
#4
Full Member
Join Date: Jul 2001
Location: Smyrna Ga.
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
The horn and the air bag warning light are the problems with the momo hub. Mazdaspeed makes a hub that has a horn set up and an air bag by pass so the system still thinks everything is ok.
#6
Senior Member
Thread Starter
iTrader: (6)
Join Date: Dec 2001
Location: Baltimore, MD
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
the air bag beeping noise can easily be disconnected and the air bag light taken out, and in my opinion i would rather have a 100 more $ in my pocket and just disconnect a few more wires.
Trending Topics
#10
Neal, Scrub and I did this install on my car a year or so ago...I remember we spent a LOT of time on this stupid thing. I did write up the info on how we figured it out in a thread Ken (fd3virgin) posted requesting help w/ the horn about a year ago as well...but since the search function's taken a crap, I can't find it.
The important parts were: 1) finding the wire, 2) leaving more than enough slack so that when the wheel turns, the wire isn't pulled off, 3) grounding the wire VERY well. We spent some time finding an adequate ground, and finally grounded it on the steering wheel nut itself. Worked like a charm. Oh, and the momo wheels/adapters come w/ a horn button and contacts on the back of it for you to insert the horn wire onto.
Check this out: http://www.scuderiaciriani.com/rx7/body.html#STE I know it left us confused and frustrated at times, but helps a bit too lol
The important parts were: 1) finding the wire, 2) leaving more than enough slack so that when the wheel turns, the wire isn't pulled off, 3) grounding the wire VERY well. We spent some time finding an adequate ground, and finally grounded it on the steering wheel nut itself. Worked like a charm. Oh, and the momo wheels/adapters come w/ a horn button and contacts on the back of it for you to insert the horn wire onto.
Check this out: http://www.scuderiaciriani.com/rx7/body.html#STE I know it left us confused and frustrated at times, but helps a bit too lol
#12
Yea...horn is a big deal w/ me, esp since you know how ppl around here drive (or don't know how to drive...more accurately). I'm gonna be getting one of those two-tone high pitched horns, to blare at those deaf guys turning into me...
Hey...did you pull the light for the airbag? Might wanna do it so it won't keep blinking at you (plus you'll never pass state inspection w/ it like that, and insurance companies may refuse to pay out if they see it too). As for the computer, my suggesstion is, LEAVE IT IN. I took out mine to get rid of the annoying 5 beeps on startup, but now I don't have a passenger airbag. That's a big liability, cuz passengers are a responsibility. So I'd leave the computer in, and just deal w/ the beeps. It can't be THAT bad... I'm gonna be putting my computer back in again.
Hey...did you pull the light for the airbag? Might wanna do it so it won't keep blinking at you (plus you'll never pass state inspection w/ it like that, and insurance companies may refuse to pay out if they see it too). As for the computer, my suggesstion is, LEAVE IT IN. I took out mine to get rid of the annoying 5 beeps on startup, but now I don't have a passenger airbag. That's a big liability, cuz passengers are a responsibility. So I'd leave the computer in, and just deal w/ the beeps. It can't be THAT bad... I'm gonna be putting my computer back in again.
#13
Back in the 7 life again
yeah, I am leaving the computer in for that specific reason...
I havent taken the light out yet because it is a pain in the *** to get to, even with a screwdriver..
I havent taken the light out yet because it is a pain in the *** to get to, even with a screwdriver..
#16
Banned. I got OWNED!!!
Join Date: Dec 2003
Location: Corpus Christi, TX
Posts: 1,545
Likes: 0
Received 0 Likes
on
0 Posts
I dont get why no one has a horn.
I dont have a connection on my HUB quick disconnect but I just put the end of the wire between my hub and steering wheel and its all good... Did anyone try this?
I dont have a connection on my HUB quick disconnect but I just put the end of the wire between my hub and steering wheel and its all good... Did anyone try this?
#17
Back in the 7 life again
still hoping someone will respond to this... I rigged up an external horn setup but was wondering how you set it up inside of the hub so it doesnt twist on itself and rip out.
#18
Neal, you simply need to leave long enough lines so that when you turn the wheel completely to one side, it's not pulling the line short. Just bundle the lines loosely as is right inside the hub. Don't put the steering wheel center cap on, and turn the wheel all the way to the right, then all the way to the left. If the lines are long enough, they shouldn't pull off.
My lines were originally a bit too short, and came off. After giving them enough slack, they were a-okay, and I haven't had a prob w/ them in almost a year now.
~Ramy
My lines were originally a bit too short, and came off. After giving them enough slack, they were a-okay, and I haven't had a prob w/ them in almost a year now.
~Ramy
#21
accept no imitations™
Join Date: Mar 2001
Location: san francisco
Posts: 2,096
Likes: 0
Received 0 Likes
on
0 Posts
hey, do you guys know what color the stock horn wiring is? the previous owner of my car left a mess under the steering column and I'm trying to piece it back together.
#22
White chicks > *
iTrader: (33)
Originally Posted by neofreak
hey, do you guys know what color the stock horn wiring is? the previous owner of my car left a mess under the steering column and I'm trying to piece it back together.
#24
RX-7 Bad Ass
iTrader: (55)
Wow, thread from the dead here....
Really, you need to use the RIGHT hub adapter. If you get a 2nd gen RX-7 hub adapter, you'll kill yourself trying to make it work. Get the HKB hub adapter, it's the same one for 1st gen Miatas. Plug and play, no dicking around.
I looked at using the "plain" Momo hub and it's a JOKE. Don't waste your time or money, the FD deserves good parts.
Dlae
Really, you need to use the RIGHT hub adapter. If you get a 2nd gen RX-7 hub adapter, you'll kill yourself trying to make it work. Get the HKB hub adapter, it's the same one for 1st gen Miatas. Plug and play, no dicking around.
I looked at using the "plain" Momo hub and it's a JOKE. Don't waste your time or money, the FD deserves good parts.
Dlae
#25
Original Gangster/Rotary!
iTrader: (213)
The horn wire is green with a red tracer. I used a multimeter to track down which pin on the oem connector was for the horn, and connected a wire with a pair of spades from that connector orifice to the back of the horn button.
FYI, removing the SRS bulb and the resulting beeps is not a very good solution. I hate the beeping already
Being that I have a 93 with zero airbags, I have no problem removing the airbag computer.... where is this sucker located?
FYI, removing the SRS bulb and the resulting beeps is not a very good solution. I hate the beeping already
Being that I have a 93 with zero airbags, I have no problem removing the airbag computer.... where is this sucker located?
Last edited by GoodfellaFD3S; 03-15-10 at 11:32 PM.