Interior / Exterior / Audio Talk about interior and exterior mods including audio.

1st Gen Stereo Question

Thread Tools
 
Search this Thread
 
Old Jan 23, 2002 | 04:53 PM
  #1  
Mschafe's Avatar
Thread Starter
Where did my 7 go?
Tenured Member 15 Years
 
Joined: Jan 2002
Posts: 357
Likes: 0
From: Burnsville, MN
1st Gen Stereo Question

My 83 GS still has the stock stereo in it. It actually sounds pretty good, but i would like a cd player. Can I just take out the old stereo and add a new one while keeping the existing speakers/amps?? I really don't want to re-wire the whole car, and the speakers sound good as they are. Also, what do I have to do to take the old one out? I can't figure out the best way to remove the center console cover.


Thanks,
Matt
Reply
Old Jan 23, 2002 | 10:22 PM
  #2  
MIKE-P-29's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 82
Likes: 0
From: Kentucky
Man its been a long time since I done an 83. I beleive from memory, 2 screws atthe top just under the dash. 2 screws behind ashtray. Remove plastic surrounding shifter boot, 2 screws behind it. I think there are 2 ***** on the climate control that need to be removed. After that the radio will come out after removing the screws securing it. But fitting a new cd player in there requires quite a bit of work. The width of the of the dash has to be modified, and the plastic radio surround panel has to be cut/filed too. Ok that said...

The amps can be used but Id say just rewire the speakers with the new radio, you'd be better off.

The DIN cords that connect to the radio can be used with a low level signal(RCA) from the new deck. But as far as pin config. I dont remmeber or know where to get it. So just rewire them....
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
5
Sep 3, 2015 07:10 PM




All times are GMT -5. The time now is 09:51 PM.