Haltech wont start
#1
yes,thats me \/
Thread Starter
iTrader: (1)
Join Date: Mar 2006
Location: Eaton, CO
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
wont start
done installing my haltech. it cranks and will not start. a couple things for you to help me:
- it displays RPM in the haltech program
- the injectors are firing and the right plugs are on the right injector
- it has spark
- disabling the fuel pump to unflood it does nothing
- it doesnt even try to start, just cranks and cranks
- i was playing with the primer map and got it to backfire a little bit while trying to start
-the CAS lines up fine, and pulley mark. i did the "stock" mazda install
-i tried 2 or 3 different maps
so it has fuel and spark but it wont start. i was thinking maybe the pulley isnt on in the right spot, seeing how this is a fresh rebuild and maybe the pulley was just put on, not in the RIGHT spot. other than this idea i dont know what else to do. anyone have any input or ideas?
- it displays RPM in the haltech program
- the injectors are firing and the right plugs are on the right injector
- it has spark
- disabling the fuel pump to unflood it does nothing
- it doesnt even try to start, just cranks and cranks
- i was playing with the primer map and got it to backfire a little bit while trying to start
-the CAS lines up fine, and pulley mark. i did the "stock" mazda install
-i tried 2 or 3 different maps
so it has fuel and spark but it wont start. i was thinking maybe the pulley isnt on in the right spot, seeing how this is a fresh rebuild and maybe the pulley was just put on, not in the RIGHT spot. other than this idea i dont know what else to do. anyone have any input or ideas?
#3
yes,thats me \/
Thread Starter
iTrader: (1)
Join Date: Mar 2006
Location: Eaton, CO
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
engine combination? s4 TII. i dont remember exactly what maps i used. i think they were from this haltech section or maybe the nopistons haltech section. i have stock fuel pressure regulator
#5
yes,thats me \/
Thread Starter
iTrader: (1)
Join Date: Mar 2006
Location: Eaton, CO
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
well i just learned the pulley can only go on one way. so it has to be a flooding issue???? or not enough fuel? will anything else factor into it?
sorry if my posts are kind of awkward, but posting in my own thread is kind of a part of my thought process.....
sorry if my posts are kind of awkward, but posting in my own thread is kind of a part of my thought process.....
#6
EFI Tech Wannabe
iTrader: (1)
Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,405
Likes: 0
Received 4 Likes
on
4 Posts
Originally Posted by cdaleracer669
engine combination? s4 TII. i dont remember exactly what maps i used. i think they were from this haltech section or maybe the nopistons haltech section. i have stock fuel pressure regulator
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM