Haltech Wierd blip in datalog
#1
Freedoms worth a buck o'5
Thread Starter
Join Date: May 2001
Location: Calgary Alberta Canada
Posts: 2,544
Likes: 0
Received 1 Like
on
1 Post
Wierd blip in datalog
At high boost levels, I am getting an odd, intermittent misfire, which shows up in the datalog as a 16,000 rpm revs momentarily once, in a single row, then returns back to whatever RPM the engine was turning.
So far everything looks to be in order, and its just at boost over say about 13 psi, but it doesn't do it all the time, I am going to shield some of the wiring with some metallic braid to see if that takes it away,
I am running an MSD6a on the leadings, with new taylor wires, and the plugs are newer as well.
If anyone has seen this before, I would appreciate some insight..Max
So far everything looks to be in order, and its just at boost over say about 13 psi, but it doesn't do it all the time, I am going to shield some of the wiring with some metallic braid to see if that takes it away,
I am running an MSD6a on the leadings, with new taylor wires, and the plugs are newer as well.
If anyone has seen this before, I would appreciate some insight..Max
Thread
Thread Starter
Forum
Replies
Last Post
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM
TainoIndian
3rd Generation Specific (1993-2002)
1
12-03-01 10:32 AM