what happens to the omp If and when I install a E6K? Can I program the haltech to run the FD omp if I remove the stock computer?

 

No.


-Ted

 

You need the E11 for that. It has a map in it for the OMP, but who knows if it's right, or what you should change it to

 

i just left mine on there plumbed in, but with no wiring.

 

block it off and start premixing, or adapt an 87 mechanical OMP

 

If the Turbo II or the engines that uses mechanical OMP maybe I will have my own to trigger at a predetermine RPM by using any of the electrical connections the pump uses that lets oil thru the lines, I know its is proportional to either engine load or rpm, but i will settle for just a constant injection at any rpm above 5000. Either hook up a micro switch on the throttle or use an out put tiggered by an RPM from the E6K

 

i believe the OMP will work at a 50% duty even with no power. i really think you should search this topic as it has been discussed/tried/failed many times w/ an FD OMP.

 

We have it figured out finally. You'll need the E11's tho.
Check out:
http://www.k2rd.com/haltech/drawings/OMP03.pdf