Ok guys ive installed a sprint re in my fc and now it wont start. I had the unit and the motor in my first gen but I moved it all into my fc..so I know the motor is good and the haltech was working flawlessly. I have spark and power to the injectors .. so when I pull the injectors there dry.. ive triple checked all my wiring and then checked it again. Im all out of idea's. So any help would be greatly appreciated

 

did you run the wire to the fuel pump?

 

You said your fuel pump was working, but the injectors are dry? Check to make sure the fuel hoses aren't connected backward and your fuel pump isn't wired backward.

 

Check and check!! Irs getting fuel to the fuel rail and I have rhe pump connected to a toggle so it comes on

 

Problem sovled!! Took me a min but I found a bad relay!! Ugh