Haltech It Runs :)
06-14-04, 11:17 AM
#1
Rotary Enthusiast
Thread Starter
It Runs :)
The car finaly started today, had a bit to much fuel pressure, so it just drowned. Turned it down to 60 psi and it started.
But the car won't idle. It just stalls when i let of the gas.
So im thinking it might be that it still is getting to much fuel.
A freind of mine is bringing a wideband lambda so that we can get it right for just cruising and run in.
Ill i hafto do now is get the rpm signal and spedometer to work and im happy
But the car won't idle. It just stalls when i let of the gas.
So im thinking it might be that it still is getting to much fuel.
A freind of mine is bringing a wideband lambda so that we can get it right for just cruising and run in.
Ill i hafto do now is get the rpm signal and spedometer to work and im happy
06-14-04, 03:45 PM
#2
Rotary Enthusiast
Thread Starter
I just found out that the Rear Traling plug does not fire. There is no spark at all.
I know i hafto use the Aux Out line and set it to ign toggle.
But im not sure where to hook up the aux out wire.
JT
I know i hafto use the Aux Out line and set it to ign toggle.
But im not sure where to hook up the aux out wire.
JT
06-14-04, 07:07 PM
#3
Lives on the Forum
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
turbo-minivan
General Rotary Tech Support
69
02-04-16 12:29 AM
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM