Claudio RX-7

iTrader: (1)

Hello all,

I am contemplating doing another Haltech group buy and i wanted to find out if there was enough of a demand to fulfill one up?

Please inform me either here on this thread or via PM if you are, include what you'd need and where are you located, as well as a phone number so i can contact you.

If this were to go through, i would do the following prices:

Kits:
E6X flying lead with air and coolant temp, haltech tps, and internal 2.5bar map sensor, US$1100.00
E8 flying lead with air and coolant temp, haltech tps and 3bar map sensor, US$1400.00
E11v2 flying lead kit with air and coolant temp sensor, haltech tps and 3bar map sensor, US$1700.00

Additional options:
Haltech wideband controller with gauge, US$400.00 (US$375.00 if ordered with a haltech kit)
Haltech 3bar map sensor US$90.00 w/connecor
Fully terminated harness option + full connector kit (subject to availability and demand) US$220.00 (please note, the harnesses would come terminated from Haltech, not to be confused with my other thread on "replacement terminated harnesses" i intend to do for specific vehicles.

Prices INCLUDE shipping, payment would be through paypal using the eCheck option (i use this option so i dont have to charge the 4% fee i get stuck with on regular payments. eCHecks take about 3-4 days to clear, but it would garantee the lowest price possible. Shipping would probably be using DHL regular ground.

As always if there are 10 or more individual orders i might be able to knock the price down a tad bit. But a minimum of 7 confirmed individuals is required for the GB to go through. If you have any questions, please dont hesitate to ask me.

Thank you.

Nismo Convert86

iTrader: (7)

Claudio, I think i could get you a few people, I'll try my best to help you out.

You know how to get a hold of me.

cHEERS

kEVIN

Mindspin311

Would you consider doing an option for a patch harness between the haltech and your specific car's factory harness?

Claudio RX-7

iTrader: (1)

I would, but that would require a slightly longer wait time for the guys who order it that way, since i would have to build them, unless haltech has them already available.

But if they wouldnt mind the the couple more days of waiting, i guess i can do it that way.

But this would ONLY be for series 5 and series 6, since i dont have series 4 ECU connectors on hand. Or vehicles with this type of connector.

Mindspin311

Awesome, let us know. I know that would work better for me at least.

eoph

I might be interested in the E8 package depending on when the GB will commence. Does it ship to Canada?

Also, is there a price on the boost control solenoid?

Claudio RX-7

iTrader: (1)

Additional options:
Haltech wideband controller with gauge, US$400.00 (US$375.00 if ordered with a haltech kit)
Haltech 3bar map sensor US$90.00 w/connecor
Fully terminated harness option + full connector kit (subject to availability and demand) US$220.00 (please note, the harnesses would come terminated from Haltech, not to be confused with my other thread on "replacement terminated harnesses" i intend to do for specific vehicles.
Haltech Boost solenoid, US$85.00
Haltech Trim ****, US$55.00
Shipping to Canada would be an additional 10 bucks on top of the total.

I will start the GB as soon as i have a commitment to buy from at least 7 people. If there are 7 people in with confirmed payments the GB is on.

mperformance

what would be "a tad bit"? give us a figure...

You know Im interested, but unconfirmed yet. Very good deals claudio...

Claudio RX-7

iTrader: (1)

Well, if we get 10 or more buyins i could knock the price of the kits about 50 bucks each, and maybe 10 bucks on the additional items.

eoph

I am in if this GB holds till the end of May.

Claudio RX-7

iTrader: (1)

Now what do the rest of you guys think about this?

Claudio RX-7

iTrader: (1)

Ok people, where do we stand, you can tell me if you'd like me to start the GB now, or do we wait a few weeks till everybody gathers their funds to take advantage of this.

Please let me know.

eoph

It would be best for me if you wait a few weeks. Hopefully more people would reply to this thread by then.

xfeastonarsex

iTrader: (5)

I sent you a pm expressing interest

Claudio RX-7

iTrader: (1)

Guys, where are we with interes on this GB, what is everybody's opinion on doing this now, later, or when?

Please post what you think. Thank you.

Mindspin311

Depends on pricing. I can give you an answer once you establish some sort of pricing with our options as to what we can get.

xfeastonarsex

iTrader: (5)

He has pricing on his first post... and more on the 7th...

I think we should start it now. Im ready to buy.

DarkKnightFC

I'm interested if I can't find any on ebay.

Chris

Claudio RX-7

iTrader: (1)

In case you missed the first post....

If this were to go through, i would do the following prices:

Kits:
E6X flying lead with air and coolant temp, haltech tps, and internal 2.5bar map sensor, US$1100.00
E8 flying lead with air and coolant temp, haltech tps and 3bar map sensor, US$1400.00
E11v2 flying lead kit with air and coolant temp sensor, haltech tps and 3bar map sensor, US$1700.00

Additional options:
Haltech wideband controller with gauge, US$400.00 (US$375.00 if ordered with a haltech kit)
Haltech 3bar map sensor US$90.00 w/connecor

Fully terminated harness option + full connector kit (subject to availability and demand) US$220.00 (please note, the harnesses would come terminated from Haltech, not to be confused with my other thread on "replacement terminated harnesses" i intend to do for specific vehicles.
Haltech Boost solenoid, US$85.00
Haltech Trim ****, US$55.00
Shipping to Canada would be an additional 10 bucks on top of the total.

Prices INCLUDE shipping, payment would be through paypal using the eCheck option (i use this option so i dont have to charge the 4% fee i get stuck with on regular payments. eCHecks take about 3-4 days to clear, but it would garantee the lowest price possible. Shipping would probably be using DHL regular ground.

As always if there are 10 or more individual orders i might be able to knock the price down a tad bit, maybe 50 dollars on each kit cost and 10 off each additional item. But a minimum of 7 confirmed individuals is required for the GB to go through. If you have any questions, please dont hesitate to ask me. A little incentive, if one individual purchases 2 systems (i.e. 2 E6X kits) i will consider this 2 purchases and count them individually, so if only 5 people come FW but 2 want 2 kits, i would count the total as 7.

Thank you.

If everyone is read, please start sending me PM's confirming your interest.

xfeastonarsex

iTrader: (5)

Well count me in as number 1.
6 more needed

Claudio RX-7

iTrader: (1)

Well there we go, how about the rest of you guys? are you in now or later on?

eoph

I need to hold out for about 2 weeks for my friend to come back from vacation to pay through paypal. I dunno anyone else that has paypal. When he comes back I am in.

Claudio RX-7

iTrader: (1)

Ok, so thats 2 people so far. Lets keep it going.

xfeastonarsex

iTrader: (5)

Can't you start your own paypal account?

eoph

Don't you need a credit card to start one?