I recently bought an elite 550 and am in the process of removing everything I will no longer need or be using. I was hopping that with this new harness I could find new connectors and crimps to avoid re-using the old ones which are getting rather brittle. So far the only thing I've been able to find are the injector connectors though, similar to what is pictured below.

Does anyone know where to find all the other various connectors that are needed? I've used Mouser in the past for computer connectors but it doesn't seem realistic to search through 31K automotive connectors they have when I don't even know what they're called other than "square-ish plug with three wires". Just some names of connectors would be helpful so I can search this place. https://www.mouser.com/Connectors/Au...ors/_/N-1ehb5/

 

Just so you know, I bougth some (the Square plug) but I cant remember where from sorry.

Now you know the stock plug opens up right? Just open it, but out the old pins and put in new ones a required, Its really easy.

 

They're from many different families and many different manufacturers. If you PM me a list of what you're looking for specifically I can most likely get you the part numbers so you can order from either mouser or digikey.

 

Yah, that's the backup plan but some of the plugs themselves are starting to degrade so I was hoping to do the whole thing.


Awesome! I'll get the plugs together and send them to you in the next few days (long hours at work right now don't leave a lot of time when I get home). If we're able to find them and it all matches up I'll either post it here or make a new one so other people can find them in the future. With these harnesses getting old and brittle it's only going to become more necessary to be able to get new plugs. Thanks!

 

https://lms-efi-llc.myshopify.com/collections/connectors

We have most every S4 - S8 connector you could need. If it's not shown on the website, drop us an email inquiry. We probably have it.

 

Thanks! This is exactly what I was looking for at this stage and a few things for the next.

The only connector I'm unsure of is the BAC connector. The one on your site is labeled FD so I wasn't sure if it would fit a series 5 TII, link below.
https://lms-efi-llc.myshopify.com/co...ac-connect-set

Here are a few pictures of mine, please let me know if it's the same one or not, thanks.