Haltech injectors not firing- E6k
#1
Rotary Enthusiast
Thread Starter
Join Date: Mar 2002
Location: Tuscaloosa, AL
Posts: 1,430
Likes: 0
Received 0 Likes
on
0 Posts
injectors not firing- E6k
I cant seem to get the engine started. 550 on the primaries, 1600 on the sec. I have spark but injector 1 and 2 on the primary are not firing. My car has set up for the past few years with the battery disconected. I tried to fire it up today but no dice.
- disable injectors is OFF
I checked the primary connectors with a multi meter and on inj 1 im getting a 10-11 v+ for both pin sockets on connector 1(thats two leads going to injector 1). Connector 2 has a 11.5v on one pin socket but 0.00v on the other. Is this right? Do you guys think my injector drivers could be the problem? Any help would be appreciated.
- disable injectors is OFF
I checked the primary connectors with a multi meter and on inj 1 im getting a 10-11 v+ for both pin sockets on connector 1(thats two leads going to injector 1). Connector 2 has a 11.5v on one pin socket but 0.00v on the other. Is this right? Do you guys think my injector drivers could be the problem? Any help would be appreciated.