Haltech Important E6K Questions
#1
Psychotic CRITIC™
Thread Starter
Join Date: Jan 2004
Location: Spread Love Its The Brooklyn Way
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Important E6K Questions
OK guys heres the deal..i have a 87 turbo 2 stock ports.....3in rb turbo back,walbro 255lph, hks supermegaflow intake, aeromotive fpr,msd (not in car yet)no ps,ac,heat,no blower..car is like a weekend car for me....well here it is...i just got my hands on a haltech e6k harness,injector harness, sensors and what not..i got it from my friend, he had it in his car and someone just stole the brain out his car..so it is already wired up and what not.....now my question is what else would i need??? how much would the e6k unit cost me??? is it possible for me to use an e6x unit??? i have all the sensors that go on the manifold...i am also getting my hands on a set of 4-720's or 4-890's injectors.....might go with 720's and 890's secondaries......is this a smart choice on my mods right now??? let me know really confused right now and plus i would like to know how you think the car would run with this set up..meaning the type of times, horsepower meets and what not...thanks alot any ideas would be greatly appreciated...thanks again
Last edited by demahfahbun106; 07-21-06 at 03:58 AM.
#2
Alcohol Fueled!
iTrader: (2)
Originally Posted by demahfahbun106
...i just got my hands on a haltech e6k harness,injector harness, sensors and what not..i got it from my friend, he had it in his car and someone just stole the brain out his car..so it is already wired up and what not.....now my question is what else would i need??? how much would the e6k unit cost me???
is it possible for me to use an e6x unit???
....might go with 720's and 890's secondaries......is this a smart choice on my mods right now??? let me know really confused right now and plus i would like to know how you think the car would run with this set up..meaning the type of times, horsepower meets and what not...thanks alot any ideas would be greatly appreciated...thanks again
#3
EFI Tech Wannabe
iTrader: (1)
Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,405
Likes: 0
Received 4 Likes
on
4 Posts
If i understood you correctly, you have a car that had an E6K installed on it, but someone stole the ECU, so you need an ECU only? well, Haltech no longer sells the E6K's since they are no longer parts to build the PCBs. Also, like J-Rat says, you can find them on ebay, but finding just the ECU will be a tad difficult, since most people sell the entire thing together. Right now i have an E6K terminated harness kid, but its complete so im selling it for a little more than that you'd normally expect to pay.
The re-pinning of the Harness is a little more complicated that how it sounds, one of the complications is the power inputs on the X have one wire going in through a trigger wire pin on the K harness, among other things.
Im not saying its not possible, to repin, its just a damn hard thing to do.
The re-pinning of the Harness is a little more complicated that how it sounds, one of the complications is the power inputs on the X have one wire going in through a trigger wire pin on the K harness, among other things.
Im not saying its not possible, to repin, its just a damn hard thing to do.
#4
Psychotic CRITIC™
Thread Starter
Join Date: Jan 2004
Location: Spread Love Its The Brooklyn Way
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
thanks
thanks guys but it think i'm just going with the e6k so i dont have to re pin anything...also remember that my set up is basically stock...
#5
Psychotic CRITIC™
Thread Starter
Join Date: Jan 2004
Location: Spread Love Its The Brooklyn Way
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
thinking....
should that fuel set up be ok with the stock turbo???i can get two 1600's, should i use thouse in my secondaries instead or not??? thanks again
Trending Topics
#8
EFI Tech Wannabe
iTrader: (1)
Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,405
Likes: 0
Received 4 Likes
on
4 Posts
Ah, so that's what you were asking, about using 1600's and a stock turbo? well, that's overkill, honestly you'd be fine with just 750's or 800's, more than enough for the stock turbo.
#10
EFI Tech Wannabe
iTrader: (1)
Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,405
Likes: 0
Received 4 Likes
on
4 Posts
Originally Posted by demahfahbun106
thanks again...i'm gonna go with 720's and 890's...or 680's and 890's..depends on what i see first..
#11
Psychotic CRITIC™
Thread Starter
Join Date: Jan 2004
Location: Spread Love Its The Brooklyn Way
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
o alright
well i'll just keep the 550 cc's primaries and go with a pair of 890cc's...i am only paying $140 for them so i might as well pick them up and use them right..lol thanks again fo the help....also when i do get the E6K unit...i would like to install this thing myself...only because there isnt going to be any type of wiring.....correct me if i'm wrong but all i would have to do is plug everything up.....would the car just fire right up???would i need to get it tuned right away?? just need to know the basics i guess..also i am getting an ignition set up..i'm thinking on going with the jacobbs(spell check) lol or just the usual msd....let me know what you think i should do or what would be best for me...thanks guys you have been real helpful with this situation..
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM