88fc3sw/HX83

All,
I was looking at the ECU forum and found that PowerFC guys are posting maps for people to compare. Why doesnt the people that run Haltechs do the same thing? I would think this would help a great deal of people.

Mn_Drift_FCon

Very good idea. I am seeing if there is interest to do a group dyno day in my area.

Of course I have to find out if there a many other Haltech managed cars in my area.

Llew.

rxrotary2_7

what did you need a map for?

Quick89TII

I need a map for a TO4E, 1600cc secondaries, Greddy 2 row IC, MSD, and all the basic ****. Can you help me out? I can tune it to be exact, just need a map to start from.

88fc3sw/HX83

I understand that a LOT of money and R&D went into the development of these maps, but then what is the purpose of a forum if you dont share information? I think THE HITMAN is a GREAT guy for sharing his maps with everyone and even myself, but I just want to compare the maps from different tuners and see what the BIG differences are. Thanks guys!

88fc3sw/HX83

maps for 550 primary 1600 secondary on a fully built street port 13bt with a turbo capable of supplying 1000cfm.

pistonsuk

here is a website with a couple of maps. http://www.ricemobile.net/haltech/maps.htm
let me know what other ones you find, i have a similar setup on my t2.
thanks,
justin

Styk33

I always try to put up whatever maps I get from people and ones from my car and others I have worked on. If people have maps you can email them to me and I will put it up. I need to redo some of the maps since there are some things I can do to make the cars run better.

There is a lot of R&D into the maps that people run in there cars and that is part of the reason why people do not give out there maps.

Most PFC maps are just guys playing around with things. I do not see to many professinally tuned maps floating around. Although I do not look around.

Suds7

Anyone have a map of a s5 engine fmic stock turbo 550cc prim 1600 secs?