Haltech Haltech
11-10-05, 09:03 PM
#1
Senior Member
Thread Starter
Join Date: Jul 2002
Location: Mt. Pleasant, MI
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Haltech
Can anyone give me a good place to purchase a new haltech 6x and can you tell me what sensors I need to purchase along with it?
I have a 89-91 Jspec with streeport and stock turbo at this time. It also has a greddy front mount.
Thanx
Michael
I have a 89-91 Jspec with streeport and stock turbo at this time. It also has a greddy front mount.
Thanx
Michael
11-20-05, 01:09 PM
#5
Suicidal Death Missile
Join Date: Mar 2004
Location: Newport News, Virginia
Posts: 1,782
Likes: 0
Received 0 Likes
on
0 Posts
Not to hijack, but where can I find an E6K? I was told that the shielding on the X's ignition wires was inadequate, and can cause ignition problems.
Trending Topics
11-27-05, 10:43 AM
#8
EFI Tech Wannabe
iTrader: (1)
Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,405
Likes: 0
Received 4 Likes
on
4 Posts
There isnt a shielding problem, the issue with the X i that the trigger circuit is very sensitive, thus aiding in the triggering of very low powered ignition triggers. But it works fine when properly setup.
I sell the X for 1150 shipped with all sensors, using the Internal MAP sensor rated at 2.5 bar/22psi.
Let me know if you need one.
I sell the X for 1150 shipped with all sensors, using the Internal MAP sensor rated at 2.5 bar/22psi.
Let me know if you need one.