How should I go about connecting my fjo wideband output to the haltech e6k?

 

Why?

You can use one of those 0-5V input and just datalog the channel.&nbsp Of course, you'd need to translate all the raw voltages to AFR's later...


-Ted

 

I want to do it because right now if i want to tune I have to use two laptops, one for fjo and one for e6k, and I want to data log.

 

i'm gonna do the exact same thing. when i get off my lazy ***. for now i use a palm pilot to datalog my FJO.....

 

So is there a way to or not? Those meters are expensive..

 

https://www.rx7club.com/forum/showth...hreadid=198413

 

You can't natively except for running the analogue output lead to the Haltech's O2 sensor and setting it up as a 1V standard sensor. It will show a 0 to 1000mV output reading but it can be "translated" for specific air/fuel ratios using the FJO digital output box. We did this on a friend of mine's car in Florida last year and it worked nicely.

B