Haltech E6X on 13B NA PP????
Rotary Enthusiast
Joined: Apr 2001
Posts: 1,289
Likes: 0
From: North Hollywood, Ca USA
E6K not an X. owner of car didn't want to put in the time to dial it in but it can work well. I wouldn't use anything larger than a 50mm throttle body though and make the intake manifold as short as possible.
'Tuna'
Joined: Feb 2001
Posts: 4,637
Likes: 3
From: Miami,Fl,USA
Re: E6X on 13B NA PP????
Originally posted by banzaitoyota
Anyone have any experience with this setup?
Anyone have any experience with this setup?
Rotary Enthusiast
Joined: Apr 2001
Posts: 1,289
Likes: 0
From: North Hollywood, Ca USA
It can work but tuning, intake, and exhaust will need to be setup correctly. Large throttle body has some weird flow issues(hard to explain). smaller throttle body seems to work better faster, but larger unit will likely make more power as it will flow more air. good luck
WTF is wrong with it now?
Joined: Oct 2001
Posts: 1,492
Likes: 0
From: London, ON
Re: Re: E6X on 13B NA PP????
Originally posted by crispeed
With the E6k I was able to extract 304rwhp/175rwtq running on methanol fuel. Best time in a 2100lb RX-3 at 290rwhp was 10.47@126mph.
With the E6k I was able to extract 304rwhp/175rwtq running on methanol fuel. Best time in a 2100lb RX-3 at 290rwhp was 10.47@126mph.
Trending Topics
WTF is wrong with it now?
Joined: Oct 2001
Posts: 1,492
Likes: 0
From: London, ON
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
Oct 7, 2015 08:12 PM
