I recieved my haltech boost solenoid ( with no instructions), the haltech manual's diagram doesnt clarify which port is which, and searching brought up only a thread about external wastegates ( i have stock s5). So what is each port, and how do i hook it up?

Where do i get the latest software for the e6k? haltechs website says their's is a "demo". any free downloads?

where does everyone mount there MAP sensor? and how far away. i had it mounted on the firewall but that made about a foot and a half of vaccuum line, and alot of factory cars i see have like 3-6 inches if that,and i cant find an unused hole to mount it to the intake manifold.

 

i looked on tweakit for haltech software ( a link i found in a post) and it was dead, hitman's site, searched no pistons and here, then haltechs "demo"

 

Goto Claudio's site (www.tuningtechnology.com). He has the full version E6K software for download.

 

thank you!

 

Guys the Haltech website has all software and manuals related to all their products in their Download section. The E6K manual has a lot of useful information on the PWM outputs and how to connect the different things you can control with the Haltech. And i think that the Windows version or latest E6X version of the E6X and E11 have it as well.

 

the e6k manual shows how to use and hook up the boost solenoid, but it does not clarify which "port" is which for hooking it up.

 

Here is the way to connet the solenoid.

 

installing the haltech has been a steep learning curve! thanks