Kalle

Have anyone connected their PS1000 to the stock boost gauge and how is the best way to do this? I have nothing left from my stock engine harness if that helps.

gxl90rx7

iTrader: (1)

there is no reason it shouldnt work.. check the FSM for exact pin, but the wire you want is in FEM-01 connector. tie that into the MAP sensor signal wire

Akagis_white_comet

iTrader: (4)

Blue/White (Pin F, Signal from Map Sensor) in FME-01 (Front to Meter harness) and Black/Blue (Ground) in FEM-01 (bottom row, 3ed from left) Please note that this Black/Blue turn into a BLACK wire on the Emission side of FEM-01

Kalle

Awesome, I´ll try this. Thanks alot! I guess it´s the same deal with the oil pressure gauge?

Akagis_white_comet

iTrader: (4)

Oil Pressure is a straight line to the gauge from the sender. The FSM Wiring Diagram has it, well worth a free download from Foxed.ca

Kalle

Got the oil pressure working. Would the Boost signal have to be programmed to get the right values to te gauge?

Kalle

So I tried to setup an AUX function for controlling the boost gauge but I cant really find a option/setting that works for that. Any ideas?

j9fd3s

iTrader: (3)

i got my boost gauge working. the stock boost gauge literally is T'ed into the stock boost sensor, which is a 2 bar sensor. i'm using an FD map sensor (because its an FD engine and ecu), so the boost gauge is off, but it moves so i'm happy

oh i should add that the gauge is just a 0-5v gauge, so it should be pretty simple to set something up.