Haltech Cluster Rpm Not working properly
#1
High Comp Booster
Thread Starter
iTrader: (4)
Join Date: Apr 2009
Location: Oakville, Ontario
Posts: 1,907
Likes: 0
Received 0 Likes
on
0 Posts
Cluster Rpm Not working properly
My car:
1991 N/a Chassis
S5 T2 Engine
Stock Coil packs
Haltech E6X
Right now I have the Cluster Rpm Wire Connected to the Service connector on the Trailing Coil pack (Yellow with a female Bullet connector)
Now the problem when its idling it shows correct Rpm When i blip the throttle It'll go from 3k to 6k and rev normally from that point
Halwin shows correct Rpm the motor doesn't miss when it happens
I don't think i have trigger issues ive watched it at idle and different rpms and it seems ok
thanks guys
1991 N/a Chassis
S5 T2 Engine
Stock Coil packs
Haltech E6X
Right now I have the Cluster Rpm Wire Connected to the Service connector on the Trailing Coil pack (Yellow with a female Bullet connector)
Now the problem when its idling it shows correct Rpm When i blip the throttle It'll go from 3k to 6k and rev normally from that point
Halwin shows correct Rpm the motor doesn't miss when it happens
I don't think i have trigger issues ive watched it at idle and different rpms and it seems ok
thanks guys
#2
mine doesnt have any tach rpm but the data list shows rpm. i think if you search i remember someone saying something about the haltech being at fault. but i would definately check the coil and wiring.
Thread
Thread Starter
Forum
Replies
Last Post
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM