*Official* Arrowhead lighting v1.1 led tails group buy
#1
*Official* Arrowhead lighting v1.1 led tails group buy
Arrowhead lighting v1.1 led tails
This will be a send in service I can only accept unmodified usdm tails or 99+ tails.
These are the new and improved version of the famous Theorie taillight. The diffused rings use the OEM diffuser and each ring assembly is contained in their own polycarbonate housing. Running lights use 48 smd leds packed on a single ring. This was done to create a smooth glow without having the need of a second diffuser which results in a much brighter running light. Brake and turn are OEM leds used in many cars today to achieve the correct level of brightness.
Full led setup will need the turn signal flasher modified to correct hyper flashing. Modification can be found here.
https://www.rx7club.com/3rd-generati...ht-way-943516/
What included:
-Full polish
-retrofitted led tails
-resealed with new butyl
This group buy is going to be very small I can only accept 5 orders. These are very labor intensive and 90% of it consists of hand soldering of the components so I can only do a small group at a time.
Price:
Option 1.$800-full led retrofit
Option 2.$700-led run-brake/standard bulb turn (turn signal will still be a diffused circle)
Subtract $50 for 99 spec tails sent in.
This will be a send in service I can only accept unmodified usdm tails or 99+ tails.
These are the new and improved version of the famous Theorie taillight. The diffused rings use the OEM diffuser and each ring assembly is contained in their own polycarbonate housing. Running lights use 48 smd leds packed on a single ring. This was done to create a smooth glow without having the need of a second diffuser which results in a much brighter running light. Brake and turn are OEM leds used in many cars today to achieve the correct level of brightness.
Full led setup will need the turn signal flasher modified to correct hyper flashing. Modification can be found here.
https://www.rx7club.com/3rd-generati...ht-way-943516/
What included:
-Full polish
-retrofitted led tails
-resealed with new butyl
This group buy is going to be very small I can only accept 5 orders. These are very labor intensive and 90% of it consists of hand soldering of the components so I can only do a small group at a time.
Price:
Option 1.$800-full led retrofit
Option 2.$700-led run-brake/standard bulb turn (turn signal will still be a diffused circle)
Subtract $50 for 99 spec tails sent in.
Last edited by turboIIrotary; 03-06-15 at 11:03 PM.
#5
Have some questions that another member asked that you guys may want to know.
1) Where do I send them? Will send address via p.m.
2) What's the turn around time? Right now it will be about 1.5 weeks
3) What's the "guarantee" on these? LED dies. Lights fog up. Whatever else that can happen. 2 year warranty on failed components. Although I do reseal them with new butyl I can't warranty fogging as I can't determine condition of the gaskets on bulb sockets.
4) You have examples of full LED vs incandescent turn? I will make a comparison here soom, I have to convert a set of tails first.
5) Is there an option for all incandescent diffused lights? Not at this moment
6) When's the next run? Unknown at this time.
1) Where do I send them? Will send address via p.m.
2) What's the turn around time? Right now it will be about 1.5 weeks
3) What's the "guarantee" on these? LED dies. Lights fog up. Whatever else that can happen. 2 year warranty on failed components. Although I do reseal them with new butyl I can't warranty fogging as I can't determine condition of the gaskets on bulb sockets.
4) You have examples of full LED vs incandescent turn? I will make a comparison here soom, I have to convert a set of tails first.
5) Is there an option for all incandescent diffused lights? Not at this moment
6) When's the next run? Unknown at this time.
Last edited by turboIIrotary; 03-02-15 at 11:44 PM.
#9
japan connection
iTrader: (52)
Very nice! Were you able to take the faded tail light and make it like new ? I think that is what one of your pics in the first post showed but just wanted to clarify.
If so I suggest you offer that as a service as well. I know a lot of people that have faded tails that would love to have them like new again.
Good luck with the sales!
If so I suggest you offer that as a service as well. I know a lot of people that have faded tails that would love to have them like new again.
Good luck with the sales!
#10
Very nice! Were you able to take the faded tail light and make it like new ? I think that is what one of your pics in the first post showed but just wanted to clarify.
If so I suggest you offer that as a service as well. I know a lot of people that have faded tails that would love to have them like new again.
Good luck with the sales!
If so I suggest you offer that as a service as well. I know a lot of people that have faded tails that would love to have them like new again.
Good luck with the sales!
#16
Lives on the Forum
iTrader: (6)
Can't believe more people haven't jumped on this. It's a great look with quality OEM components. It also takes a lot of work to make this happen.
Regarding the center light section, have you tried any of the COB LED strips as a retrofit? I am thinking an amber/red unit might work really well and be brighter than the stock unit.
Regarding the center light section, have you tried any of the COB LED strips as a retrofit? I am thinking an amber/red unit might work really well and be brighter than the stock unit.
#24
0.name/option 1 or 2
1. Thatdon/1-50
2. mystery buyer/1-50
3. fdrx7/1
4. mystery buyer/1-50
5. mystery buyer/1
Group buy is unofficially closed right now as a couple payments are pending. I will open up 5 more slots in about 3-4 weeks and I will be accepting people who want to get in early. The second group buy will not include the third brake light. I will update pricing on the third brake light in the next day or two.
1. Thatdon/1-50
2. mystery buyer/1-50
3. fdrx7/1
4. mystery buyer/1-50
5. mystery buyer/1
Group buy is unofficially closed right now as a couple payments are pending. I will open up 5 more slots in about 3-4 weeks and I will be accepting people who want to get in early. The second group buy will not include the third brake light. I will update pricing on the third brake light in the next day or two.