I have a '87 TII (flat panel to cone filter conversion and 3in catback w/straight pipe) and it wont idle. When i start it up it stys running with no problems but if i let off the throttle it just stalls out. I have heard it could be the BAC valve and im pretty sure thats what the problem is. i have to take it off and clean it up hopefull that will work. any other ideas please tell. Problem 2. After i drive for any amount of time, turn it off, and go back to start it again within about 20 min, the car wont start, because the engine is flooded. i then have to get out pull the fuel pump fuse thingy unflood, put the fuse back in, and then it usually will start. I was gonna just put in a fuel cut switch, but would cleaning the BAC valve fix my prob. any ideas, thoughts or fixes please tell.

 

the switch will work...or get new injectors.....they like to leak!

 

where should i run the switch from? i have heard of a plug or harness somewhere in the console to install a switch but i dont know. please help.

 

http://www.teamfc3s.org/info/articles/idle.html