Stainless braided hose for fuel system
#1
MAGNUM SE7EN
Thread Starter
iTrader: (11)
Join Date: Mar 2001
Location: Asheville, NC USA
Posts: 1,427
Likes: 0
Received 0 Likes
on
0 Posts
Stainless braided hose for fuel system
Can anyone point me to high quality stainless braided hose? I will be doing a fuel system and want something that will last. I want hose that is not rubber, preferrably synthetic like silicon. Is teflon lined a good type to use? What is best for the job?
#2
Rotary Enthusiast
Join Date: Mar 2002
Location: Tuscaloosa, AL
Posts: 1,430
Likes: 0
Received 0 Likes
on
0 Posts
There is some really good line, Im not sure what its called but a buddy of mine uses it on his late model dirt track car. This **** is tuff and it holds up to 250 psi(more than enough). Im on my way to his shop, I will find out for you.
I was once thinking about ss briaded line but you need screw fittings. The stock fuel system is slip-on so I thought it would be a pita so Im going with the other stuff. Plus the line that im talking about is a hell of alot cheaper than ss line.
I was once thinking about ss briaded line but you need screw fittings. The stock fuel system is slip-on so I thought it would be a pita so Im going with the other stuff. Plus the line that im talking about is a hell of alot cheaper than ss line.
#3
Rotary Freak
My mechanic has replaced his gas lines from the tank to the motor with air craft steel tubing bent to match the stock , put in the stock location. Only it is larger sized. The cost was about $1.00 per foot . compair that to the cost of SS braided , plus the fittings . his is bigger from the fuel pump in the tank to the rails back to the regulator .
#4
Senior Member
iTrader: (3)
Join Date: Mar 2003
Location: Atlanta, GA
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
i use aeroquip, works great. u can buy it here: http://www.pegasusautoracing.com/