Stainless braided hose for fuel system
 

Can anyone point me to high quality stainless braided hose? I will be doing a fuel system and want something that will last. I want hose that is not rubber, preferrably synthetic like silicon. Is teflon lined a good type to use? What is best for the job?

There is some really good line, Im not sure what its called but a buddy of mine uses it on his late model dirt track car. This shit is tuff and it holds up to 250 psi(more than enough). Im on my way to his shop, I will find out for you.
I was once thinking about ss briaded line but you need screw fittings. The stock fuel system is slip-on so I thought it would be a pita so Im going with the other stuff. Plus the line that im talking about is a hell of alot cheaper than ss line.

My mechanic has replaced his gas lines from the tank to the motor with air craft steel tubing bent to match the stock , put in the stock location. Only it is larger sized. The cost was about $1.00 per foot . compair that to the cost of SS braided , plus the fittings . his is bigger from the fuel pump in the tank to the rails back to the regulator .

i use aeroquip, works great. u can buy it here: http://www.pegasusautoracing.com/

Is it ok to use the Teflon hose for fuel lines?