Chuck

iTrader: (2)

Do I need new motor mounts, or will an engine brace solve the problem?....1991 N/A

speedturn

iTrader: (1)

Check your motor mounts. If they are good, then the problem is a warped clutch, caused by overheating it, which was caused by you slipping it too much.

90WhiteVrt

I have a new clutch and new motor mounts and i have the same damn problem!!

Tofuball

If the pressure-plate is faulty or torqued down wrong it can do this.

Or if your flywheel is messed up.

88rxn/a

iTrader: (6)

i was told my clutch is glazed over. but then again my shocks and bushings are all original!! kinda fun at 110!!little scary though. but my car has 46,000 orig. miles on it!l

blwfly

iTrader: (4)

i kinda have the same problemwhen i rev from 1500 to 3500 it shudders but when its up to 5-8 it goes away by the way this is when the car is stationary

slpin

iTrader: (9)

resruface ur flywheel and pressure plate,,, maybe a new clutch too while you are down there... and learn to drive better from now on........

dsm.who

he told you to get a turbo

matts86fc3s

you didnt machine your flywheel did you? is your clutch a stage 2 or 3? stage 2 and 3 clutches will chudder a little when you first start off in/or go real slow in 1st and reverse... machining your flywheel will help this a little bit. i have same problem, i have stage 3 clutch and didnot machine my flywheel