i just need to know if this is good or not. i have no experience to be able to tell. thanks.

if not, why?

 

more

 

there's alot of edge flaking

 

measure the wear. if it is 1/8in. it is toast.

 

Where did it come from?

It's "usable", so don't expect best compression / power from the engine...


-Ted

 

i got it during a huge trade when i bought my SA a couple years back. ive just been having it sit as a display since then. im just debating selling it ifs actually usable and getting some truely trashed housings for displays.

so i need to measure the dept of the flaking or the dept of the chrome?

also, its a T2 housing.

 

the housing is still good i have used way worse on the motors i build for myself and i still get a lot of good milage

 

If it's a pre-86 rotor housing, the wear isn't unusual.
Now, since it's an FC housing, I would worry.

What's worse is the fact that it looks like it's grooved on both ends.
This means the housing was flipped around - almost guaranteed the housing was reused at least once before.

I wouldn't bother reusing it unless you don't have any options.


-Ted