General Rotary Tech Support Use this forum for tech questions not specific to a certain model year

rev problem with my fd

Thread Tools
 
Search this Thread
 
Old 10-26-05, 03:05 AM
  #1  
Junior Member

Thread Starter
 
alfy05's Avatar
 
Join Date: Sep 2005
Location: arizona
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
rev problem with my fd

their is a problem with my fd. When im heavy on the gas at any gear it seems that the rpms suddenly shoot up starting from 3.5g all the way to 8g, and when it ramps up the car stops to pull. it pulls fine from 1 to 3 but when the turbo kicks it ramps very suddenly.when im light on the gas the car runs fine till about 4g then it starts to ramp. Their also is a strong smell comming from the car when it ramps. i thought it was coolant or my clutch. the car has just been tuned about a week ago. I just looked at the flywheel and pressure plate and two of the 6 bolts keeping it in place have been stripped off. Any suggestions on what the problem is.
Thanks for the help

Last edited by alfy05; 10-26-05 at 03:22 AM.
Old 10-26-05, 09:36 PM
  #2  
multipersonality disorder

 
GUITARJUNKIE28's Avatar
 
Join Date: Feb 2002
Location: so. cal
Posts: 5,656
Likes: 0
Received 0 Likes on 0 Posts
slipping clutch.

time for a new one.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RedBaronII
3rd Generation Specific (1993-2002)
4
09-20-15 11:29 AM
rotary_rx7fc
1st Generation Specific (1979-1985)
20
09-19-15 02:41 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
localized
New Member RX-7 Technical
3
09-16-15 12:18 AM
Adrian Anguiano
3rd Generation Specific (1993-2002)
3
09-14-15 05:29 PM



Quick Reply: rev problem with my fd



All times are GMT -5. The time now is 10:53 PM.