PMB blasting
#1
Junior Member
Thread Starter
Join Date: Feb 2006
Location: here
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
PMB blasting
PMB (plastic media) or glassblasting, whould it harm the housings to hit the houseing with any of this stuff? IE wil it not seal correctly
i use the glassblaster at work all ther time for aircraft brakes , so im guessing it wont **** up the housings, or would masking off what the rotar is exposed to be wise? or should i not do any of it?
i use the glassblaster at work all ther time for aircraft brakes , so im guessing it wont **** up the housings, or would masking off what the rotar is exposed to be wise? or should i not do any of it?
#2
GET OFF MY LAWN
iTrader: (1)
I've used duct tape on the apex seal surface and left the water jacket/o-ring surfaces exposed. When you shoot just don't aim directly at the o-ring surface. When I clean the outside I just shoot so that face is away from the gun(around the corner from the edge). It probably wouldn't hurt with glass beads but I like to be safe.
Thread
Thread Starter
Forum
Replies
Last Post
tiger18
3rd Generation Specific (1993-2002)
9
09-03-15 08:27 PM