oil cooler bypass valve installation
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Apr 2015
Location: Melbourne
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
oil cooler bypass valve installation
hi guys
I know this has been covered on here before but for some reason I can not see any of the images.
Was doing my run in oil change and thought it would be best to get as much oil out as possible so I removed what I thought was a drain bolt on the oil cooler.
I was wondering if any one can help me with a pic of how to install the valve and spring into the oil cooler. I pulled it and out fell the spring and valve so now I'm scared to guess as its a new engine.
Thanks tommy
I know this has been covered on here before but for some reason I can not see any of the images.
Was doing my run in oil change and thought it would be best to get as much oil out as possible so I removed what I thought was a drain bolt on the oil cooler.
I was wondering if any one can help me with a pic of how to install the valve and spring into the oil cooler. I pulled it and out fell the spring and valve so now I'm scared to guess as its a new engine.
Thanks tommy
#2
roTAR needz fundZ
iTrader: (1)
I don't have pictures, so i'll try and describe it the best i can
Go in this order, bolt, set the copper piece so it sits flush (the spring part sticks up) than set the spring over top of that, than put it together
It sprang apart on me too the first time i took it apart, but it honestly can one go together ONE way, any other way things don't line up
Go in this order, bolt, set the copper piece so it sits flush (the spring part sticks up) than set the spring over top of that, than put it together
It sprang apart on me too the first time i took it apart, but it honestly can one go together ONE way, any other way things don't line up
Thread
Thread Starter
Forum
Replies
Last Post