Non-sequential simplified CELs!
05-31-14, 01:56 PM
#1
Full Member
Thread Starter
iTrader: (2)
Join Date: Jul 2009
Location: Gunnison, CO
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Non-sequential simplified CELs!
I put resistors on the silinoids that on for the rats nets.
I don't know why I throw code 6 my speedo meter works.
Would code 28-32 be the sensors on the EGR(i did not put resistors on those)
6- Vehicle Speed Sensor - no signal
18- Throttle Position Sensor (Narrow Range) - open or short circuit
20- Metering Oil Pump Position Sensor - open or short circuit
23- Fuel Thermosensor - open or short circuit
24-Double checked on this and no actual code for 24
28 Solenoid Valve (EGR) - open or short circuit
29-Solenoid Valve (EGR vent)
30-Solenoid valve, split air bypass - open or short circuit
32-Secondary Air Switching Valve - open or short circuit
Any help would be appreciated
I don't know why I throw code 6 my speedo meter works.
Would code 28-32 be the sensors on the EGR(i did not put resistors on those)
6- Vehicle Speed Sensor - no signal
18- Throttle Position Sensor (Narrow Range) - open or short circuit
20- Metering Oil Pump Position Sensor - open or short circuit
23- Fuel Thermosensor - open or short circuit
24-Double checked on this and no actual code for 24
28 Solenoid Valve (EGR) - open or short circuit
29-Solenoid Valve (EGR vent)
30-Solenoid valve, split air bypass - open or short circuit
32-Secondary Air Switching Valve - open or short circuit
Any help would be appreciated
Thread
Thread Starter
Forum
Replies
Last Post
Snook
3rd Generation Specific (1993-2002)
17
02-27-21 02:54 PM
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM