General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

no start 3rd gen

Old Nov 14, 2001 | 10:25 AM
  #2  
Hyperite's Avatar
Vagina Junction
Tenured Member 20 Years
 
Joined: Mar 2001
Posts: 1,838
Likes: 0
From: Seattle, WA
You'll need to replace the plugs, gasoline soak ***** them up. I've been there. Also, crank it a few times w/ the plugs out (AND IGNITION STUFF CAPPED/DISCONNECTED TO PREVENT EXPLOSION!). Then put in some new plugs, make sure you ARE getting a spark, and give it another try. If you're getting gas, spark, and air, it can't help BUT fire. Check the plug wires and make sure they haven't fallen off the coil. Leading ones will affect starting. Good luck!
~Tom
Reply
Old Nov 15, 2001 | 09:19 AM
  #3  
gnx261's Avatar
Newbie
 
Joined: Nov 2001
Posts: 1
Likes: 0
From: sarasota, florida
The starter switch may be bad as mine was recently. you may want to check it. doug
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1993fd3sracer1
3rd Generation Specific (1993-2002)
29
Oct 13, 2015 01:57 PM
1993fd3sracer1
1st Generation Specific (1979-1985)
20
Sep 7, 2015 11:50 AM
R7rexy
3rd Generation Specific (1993-2002)
19
Sep 2, 2015 10:24 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:24 PM.