General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

No spark - won't start 1993 FD RX7

Thread Tools
 
Search this Thread
 
Old Oct 22, 2014 | 02:54 PM
  #1  
keffinrx7's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Oct 2014
Posts: 19
Likes: 0
From: Aurora, CO
CO No spark - won't start 1993 FD RX7

Hi all,

I have a really tough one for the geniuses out there, I have spent weeks trying to get a spark with no success. Was running great when I bought it, I go to clean and secure some things under the intake and replace the fuel lines and now no spark. After reading tons of threads and the entire service manual some of the telling symptoms are NO TACH MOVEMENT during crank, fans usually turn on with ignition, engine will crank fine with good compression and fuel. No spark!

List of relevant upgrades:
PFC PFC3S2 (missing the commander)
Recent rebuild with streetport
Sequential turbos converted to non-sequential
Automatic transmission converted to manual

What I've tried so far:
Checked all fuses a thousand times
It's not just a flooding issue
replaced spark plugs
Checked power/ignition to PFC
Replaced coils and pigtail to coils
Replaced CAS - has good continuity to the ECU
Tested every connection I can think of - all good
Checked power to igniter

Any and all help will be much appreciated before I take it to a shop! I have a hard time finding how to test certain things (ex. Power to the coils, how to test the pulse coming from the CAS, where exactly the tach gets its pulse from and why it won't bump during start, etc.).

Thx,
Kevin

Last edited by keffinrx7; Oct 22, 2014 at 03:00 PM.
Reply
Old Oct 24, 2014 | 10:01 PM
  #2  
keffinrx7's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Oct 2014
Posts: 19
Likes: 0
From: Aurora, CO
Well maybe this is a tough one. Can someone help by maybe telling me what the PFC commander will do in this instance. My car didn't come with a commander unfortunately and I have yet to get one. So questions:

- Will the commander tell me anything about the status of the ECU during crank?
- Will the commander show an engine RPM reading even if the tach doesn't?
- If the PFC is bad by chance would it still power up? Would the commander give me any error codes such as "overheat" etc? (I do at least know that it powers up and has power during crank)

Any simple help like this will be much appreciated...

Thx,
Kevin
Reply
Old Dec 14, 2014 | 08:42 PM
  #3  
rxmiles's Avatar
Spinning Dorito
iTrader: (11)
 
Joined: Dec 2010
Posts: 405
Likes: 0
From: Boulder, Colorado
Kevin, you have not clarified how yo came to the conclusion it's a no spark issue. Any ways the coils are susceptible to bad grounding but being that you have some mods you might have to trace back.

I live in Longmont, I might be able to assist.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
NJ-JDM
3rd Generation Specific (1993-2002)
43
Aug 23, 2015 11:02 PM
PhillyFC
General Rotary Tech Support
9
Aug 21, 2015 06:36 PM
Im faster
General Rotary Tech Support
4
Aug 19, 2015 02:57 PM




All times are GMT -5. The time now is 05:49 PM.