no power
#26
Moderator
iTrader: (1)
There's a plug w/two wires running to the ignition switch such that one of the wires is Black and the other is B/W. The B/W wire powers the IG1 fuses (Meter fuse) w/key to on so this wire (B/W) should have voltage w/key to on as well. If it doesn't then the Meter fuse will not have power. Not familiar w/how your controller is wired so I would not know, but just check the previous stuff and help to eliminate things in a logical manner.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM