There's a plug w/two wires running to the ignition switch such that one of the wires is Black and the other is B/W. The B/W wire powers the IG1 fuses (Meter fuse) w/key to on so this wire (B/W) should have voltage w/key to on as well. If it doesn't then the Meter fuse will not have power. Not familiar w/how your controller is wired so I would not know, but just check the previous stuff and help to eliminate things in a logical manner.

 

Thanks man...

 

Found the problem... the ignition was wired wrong... jerked all the wires and rewired it and "tada" everything works. Thanks for the help man