General Rotary Tech Support Use this forum for tech questions not specific to a certain model year

Need some advice / help

Thread Tools
 
Search this Thread
 
Old 11-25-08, 04:46 AM
  #1  
Junior Member

Thread Starter
 
Ater's Avatar
 
Join Date: Feb 2008
Location: Las Vegas
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Unhappy Need some advice / help

so not to long ago i had my engine rebuilt and its acting strange i was wondering if anyone could help. here is whats going on car only has about 100miles on the rebuild i took it out to get some stuff and to drive it some more because it was driving really good earlier. and it was fine then all of a sudden i would shift it and try to give it gas and it would feel dead still have rpms but no power at all then chug for a bit like its fighting or sticking or something then drive ok then stick and have no power. this is crazy idk one min its good next its bad... then all over again. i also noticed a wet spot on my radiator i think it might have a leak but i dont think that can cause the probs im having.

well thanks for looking at my post and any help or advice will be greatly appreciated!
Old 11-25-08, 12:27 PM
  #2  
Moderator

iTrader: (3)
 
diabolical1's Avatar
 
Join Date: Feb 2002
Location: FL
Posts: 10,814
Received 306 Likes on 267 Posts
welcome to the board!

please keep in mind the more specifics you provide the better someone will be able to help you.

what year?

what setup?
Old 11-25-08, 02:05 PM
  #3  
Junior Member

Thread Starter
 
Ater's Avatar
 
Join Date: Feb 2008
Location: Las Vegas
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
right sorry

its a 88 na

and the main prob is its seems like its sticking after it engages to the gears. maybe its not transferring power properly?
Old 11-26-08, 02:29 AM
  #4  
Moderator

iTrader: (3)
 
diabolical1's Avatar
 
Join Date: Feb 2002
Location: FL
Posts: 10,814
Received 306 Likes on 267 Posts
power transfer would probably mean clutch, and since you're describing a good-bad-good-bad power delivery, i doubt if it's clutch. a bad clutch only gets progressively worse as it heats up - plus there's usually a distinct smell.

when last did you tune it up? also, maybe check your oxygen sensor.
Old 11-26-08, 05:54 AM
  #5  
Junior Member

Thread Starter
 
Ater's Avatar
 
Join Date: Feb 2008
Location: Las Vegas
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
not to long ago on the tune up it was done right after the rebuild.

what is the best way to check the oxygen sensor?
Old 11-27-08, 01:41 PM
  #6  
Junior Member

Thread Starter
 
Ater's Avatar
 
Join Date: Feb 2008
Location: Las Vegas
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
There is also a lot of after burn popping sound out of the exhaust when not driving. ill try to get a video up in the next few days
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Andrew7dg
1st Generation Specific (1979-1985)
3
08-06-17 01:41 PM
eddierotary
Engine Management Forum
16
10-04-16 08:22 PM
Zinraf
2nd Generation Specific (1986-1992)
3
10-01-15 01:09 PM
izzolaw
1st Gen General Discussion
2
09-27-15 08:33 PM
risingsunroof82
1st Generation Specific (1979-1985)
8
09-07-15 01:11 PM



Quick Reply: Need some advice / help



All times are GMT -5. The time now is 09:54 PM.