General Rotary Tech Support Use this forum for tech questions not specific to a certain model year

Instrument cluster light problem

Thread Tools
 
Search this Thread
 
Old 10-20-07, 06:09 PM
  #1  
Senior Member

Thread Starter
 
docholiday's Avatar
 
Join Date: Sep 2004
Location: Vancouver
Posts: 277
Likes: 0
Received 1 Like on 1 Post
Instrument cluster light problem

i've got a 1982 rx7

here's the story. i just got my car back together after being painted. had engine bay done as well so everything was removed from the engine bay. i BELIEVE i've put everything back where it should go. now when i turn my lights on the dash lights dont work. all the lights for the idiot cluster belown the tach work fine, turn signals work fine, all the gauges on my dash work fine. just the wonderful orange glow of the numbers doesnt light up. i've pulled it out and checked that everything was connected. i even replaced all the bulbs in the back of it today. still nothing. underneath the dash everything appears to be hooked back up except there are 2 loose wires with female connections on the end. they come off the main harness (the one that goes across the firewall towards the center of the car and then up behind the dash where your right knee would be if you were sitting in the drivers seat). would these have anything to do with it? i dont see where they could go to. or did i maybe miss something in the engine bay thats somehow linked to those lights? any help would be much appreciated cuz its a bit of a bitch to drive at night like this. thanks.

dave
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
8
09-02-18 09:53 AM
OrangeMax
New Member RX-7 Technical
3
09-04-15 10:42 AM
Snook
3rd Generation Specific (1993-2002)
8
08-26-15 03:40 PM
fastsaab
New Member RX-7 Technical
5
08-19-15 11:42 AM



Quick Reply: Instrument cluster light problem



All times are GMT -5. The time now is 05:59 PM.