General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

i need someone smarter than i am

Thread Tools
 
Search this Thread
 
Old Dec 14, 2004 | 01:19 PM
  #1  
KiddScorpio's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2004
Posts: 22
Likes: 0
From: Dover Ohio
i need someone smarter than i am

ok maybe someone w/ a clear mind can help me......my 86 RX7 started last night then shut down.... i found that if i put a 30a fuse in the spare main fuse slot that i could start it......but when i turn the key off the engine keeps going.....but nothing else. so i start exploring. it has something to do w/ the engine fuse under the dash not getting power to it.......could it be a relay? if so, which one? what i did as a temp fix is ran a wire from the battery to the engine fuse and put a toggle to kill the motor......please help, my mind is tangled in the wiring and i need a fresh thought process to help me.
Reply
Old Dec 14, 2004 | 03:29 PM
  #2  
nevarmore's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 739
Likes: 0
From: NE Ohio
You're in Ohio? Dover is down near New Philly if I remember right.

Head over to OhioRotaries.com, I've already copied your post over for ya. There are some locals on there that don't come around here much that could probably help.
http://www.ohiorotaries.com/phpBB2/viewtopic.php?t=242

Have you actually blown any fuses?
Reply
Old Dec 15, 2004 | 08:45 AM
  #3  
KiddScorpio's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2004
Posts: 22
Likes: 0
From: Dover Ohio
no fuses blown....mind boggling........thanks for the lead, i appriciate it
Reply
Old Dec 15, 2004 | 11:54 PM
  #4  
locketine's Avatar
Road Rotary Aviator
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 499
Likes: 0
From: Oregon
so basically ur ignition system works only when the key is at the start position? without using that mystery fuse. Ur problem has got to be in the circuit involving the "run" key position.
Reply
Old Dec 16, 2004 | 01:11 PM
  #5  
KiddScorpio's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2004
Posts: 22
Likes: 0
From: Dover Ohio
?

this i know..... either its a short(open) in the wiring or the fuse box?
Reply
Old Dec 17, 2004 | 02:14 PM
  #6  
nevarmore's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 739
Likes: 0
From: NE Ohio
Have you checked the 2nd gen forums? I know some wonderful person posed a Factory Service Manual for us firstgenners, and FC'er mightve done the same.

I know it sucks, but get a test light or a multimeter* and start tracing. I would start at the fuse panel and the underhood components. If nothing is amiss there then pull the column open.

*Radio Shack P/N 22-802, best $20 I ever spent at the shack
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
seven_intheworks
3rd Generation Specific (1993-2002)
6
Apr 15, 2006 09:09 PM




All times are GMT -5. The time now is 02:48 AM.