I am having some issues with my FC
#1
Full Member
Thread Starter
Join Date: May 2006
Location: Long Island / Hudson Valley NY
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
I am having some issues with my FC
I am having some issues with my FC that I need help with.
1. When I am driving and I make hard left turns it loses power n feels like it's going to turn off but then it gains power again. What can that be?
2. My windows go up kinda slow n some times they get stuck and I have to pull them up.
3. My wipers switch i think is not working because the only speed that works is the normal one. The fast speed n the slow speed don't work.
Could someone please help me figure this issues out. Please pm me so I don't have to go looking for this tread.
1. When I am driving and I make hard left turns it loses power n feels like it's going to turn off but then it gains power again. What can that be?
2. My windows go up kinda slow n some times they get stuck and I have to pull them up.
3. My wipers switch i think is not working because the only speed that works is the normal one. The fast speed n the slow speed don't work.
Could someone please help me figure this issues out. Please pm me so I don't have to go looking for this tread.
#2
Moderator
iTrader: (3)
get yourself a copy of the FSM/wiring diagrams.
1. sounds like a pickup problem, but from what i know of the Gen II fuel tank design, i'm not sure how that can be. it's worth a look though.
2. start with the switches. inspect and clean all connectors/connections. lubricate the joints and tracks of the regulators.
3. remove the switch and test it.
you can always link the thread to your e-mail or subscriptions that way you can find it easily. this section doesn't get an awful amount of traffic though, so i think it'll stay on this page for a while. feel free to PM me if you still have issues. i'm somewhat local to you.
1. sounds like a pickup problem, but from what i know of the Gen II fuel tank design, i'm not sure how that can be. it's worth a look though.
2. start with the switches. inspect and clean all connectors/connections. lubricate the joints and tracks of the regulators.
3. remove the switch and test it.
you can always link the thread to your e-mail or subscriptions that way you can find it easily. this section doesn't get an awful amount of traffic though, so i think it'll stay on this page for a while. feel free to PM me if you still have issues. i'm somewhat local to you.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM