FD3S rough idle, won't run normal.
#1
Flying Doritos
Thread Starter
FD3S rough idle, won't run normal.
Hi guys,
I recently had some problems with my 93 FD3S. The other day I started the engine, let it heat up for 5 min and run normally. I engaged Reverse to get out of my garage, and she started to run strange.
See :
If I didn't hit the gas, rpm was between 500-1000.
I checked the MAP sensor, was okay.
Charged the battery.
Looked for unplugged hoses, everything was in place.
The engine is supposed to be 30,000km old.
I have a Power FC, Greddy BOV, PFS Intercooler, MSD plug wires, new NGK plugs, upgraded pulley kit and a big exhaust lol.
Here's a startup video :
And here's what coming out from the exhaust :
Thanks for helping me out, summer is long without my beauty.
I recently had some problems with my 93 FD3S. The other day I started the engine, let it heat up for 5 min and run normally. I engaged Reverse to get out of my garage, and she started to run strange.
See :
I checked the MAP sensor, was okay.
Charged the battery.
Looked for unplugged hoses, everything was in place.
The engine is supposed to be 30,000km old.
I have a Power FC, Greddy BOV, PFS Intercooler, MSD plug wires, new NGK plugs, upgraded pulley kit and a big exhaust lol.
Here's a startup video :
Thanks for helping me out, summer is long without my beauty.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM