General Rotary Tech Support Use this forum for tech questions not specific to a certain model year

cold start problems

Thread Tools
 
Search this Thread
 
Old 01-24-04, 03:32 AM
  #1  
Junior Member

Thread Starter
 
Join Date: Jan 2004
Location: Wirral
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
cold start problems

my 1984 rx7 has no trouble starting when warm but after its stood over night it just won,t start unless its a push start. Whats the likely problem/solution
Thanks
Old 01-24-04, 04:41 PM
  #2  
Full Member

 
black_sunshine's Avatar
 
Join Date: Nov 2001
Location: Springfield, MO
Posts: 206
Likes: 0
Received 0 Likes on 0 Posts
I'm going to asume that you're talking about a 12a carbeureted and not a 13b FI. Are you choking the car when you try to start it? Pull the choke out all the way, crank it until it tries to start. After that, push it in 1/3 of the way (2/3 choked) and try again or keep it running. When you're driving, either push it in all the way (no choke) or 2/3 of the way (1/3 choked).

It should be cranking at around 250rpm. If it's flooding or not cranking at a decent speed, check your battery and starter.
Old 01-25-04, 08:34 AM
  #3  
Junior Member

Thread Starter
 
Join Date: Jan 2004
Location: Wirral
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
No starter motor has just been rebuilt. Problem was solved by pouring some petrol down the carb - so latest thinking is a bad accelartor diaphram.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kyo
2nd Generation Specific (1986-1992)
6
04-13-19 09:24 AM
stickmantijuana
Microtech
30
04-23-16 06:37 PM
1993fd3sracer1
3rd Generation Specific (1993-2002)
29
10-13-15 01:57 PM
1993fd3sracer1
1st Generation Specific (1979-1985)
20
09-07-15 11:50 AM
85TIIDEVIL
2nd Generation Specific (1986-1992)
7
08-25-15 12:09 AM



Quick Reply: cold start problems



All times are GMT -5. The time now is 03:46 PM.