clarification on OEM oil seals
#1
Damn, it did start!
Thread Starter
clarification on OEM oil seals
As I understand, oil control ring seals are universal. all years, all models, including RX8. There are green seals. (inner 0820-11-341, outer 1202-11-343) which are listed up to 95 or RX8 parts ( inner N3H3-11-C35, N3H3-11-C37 outer).
The RX8 parts are cheaper. both OEM. So whats going on here? Does one hold an advantage over the other?
The RX8 parts are cheaper. both OEM. So whats going on here? Does one hold an advantage over the other?
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,792
Received 2,573 Likes
on
1,829 Posts
interesting, they must be different material?
i think if you bought the new seal set N3Z1-11-S10A, then you would be fine using the Rx8 rubber seals.
if you use the original seal set, which would have been 8871-23-180, i'd probably run the old rubber seals.
the Rx8 also has different outer springs, probably good to upgrade to that too
i think if you bought the new seal set N3Z1-11-S10A, then you would be fine using the Rx8 rubber seals.
if you use the original seal set, which would have been 8871-23-180, i'd probably run the old rubber seals.
the Rx8 also has different outer springs, probably good to upgrade to that too
The following users liked this post:
Richard Miller (03-22-19)
#3
Damn, it did start!
Thread Starter
Thank you.
Thread
Thread Starter
Forum
Replies
Last Post
Fsunoles06
3rd Generation Specific (1993-2002)
59
07-13-08 12:54 PM
JaNusSolSumnus
3rd Generation Specific (1993-2002)
30
05-21-06 05:40 PM