General Rotary Tech Support Use this forum for tech questions not specific to a certain model year

Boost Leak?

Thread Tools
 
Search this Thread
 
Old 08-04-03, 03:14 PM
  #1  
Junior Member

Thread Starter
 
Join Date: May 2003
Location: texas
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Boost Leak?

I seem to have a problem ive done several modifications to my Rx-7 (93), when I bought it came with Blitz intake and HKS exhuast (super dragger) ive modded it alittle since then.. ( M2 downpipe, greddy turbo timer, greddy innercooler piping, greddy intake piping, and changed the secondary turbo soleniod) I am still boosting 10psi then drops to 6-7 then raises slowly when I am at full throttle..

I think I have a boost leak at my STOCK Y-pipe though I am not sure, could I take it anywhere to have it checked maybe a Diagnostic? would that show where the boost leak is at? I have replaced all the stock non-solid parts so I strongly beilive that the leak is at the Y-pipe for some reason a sorce said I should be boosting at least 12psi now with that DP installed and hard pipes.

Thanks
Old 08-06-03, 05:39 PM
  #2  
Junior Member

Thread Starter
 
Join Date: May 2003
Location: texas
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Never mind guys I fixed the problem, the secondary and primary electronic plugs were crossed over yehaww!! boostin 12psi!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM
High_Carb_Diet
Power FC Forum
1
09-05-15 09:07 AM
gabescanlon
3rd Generation Specific (1993-2002)
4
09-05-15 12:04 AM
FührerTüner
General Rotary Tech Support
3
09-04-15 01:41 PM



Quick Reply: Boost Leak?



All times are GMT -5. The time now is 09:08 PM.