General Rotary Tech Support Use this forum for tech questions not specific to a certain model year

Blown engine?

Thread Tools
 
Search this Thread
 
Old 01-04-06, 10:14 PM
  #1  
Full Member

Thread Starter
iTrader: (1)
 
dave5678's Avatar
 
Join Date: Nov 2005
Location: Germany
Posts: 73
Likes: 0
Received 0 Likes on 0 Posts
Blown engine?

Hi. My buddys 93 auto FD is having some problems. It started up perfectly and drove to work just fine which is a mile away at the most. About 4 and a half hours ago he called me saying it wouldnt start. I drove out there and when he tries to start it the engine shakes with smoke shooting out the bottom of a pipe on the passenger side directly to the right of the stock bov also it has oil buildup around it. Looks like the turbo manifold. Smoke sits in the exhaust. He has 83000 miles. He had it for 3 months. He drives like a granny so i dont think that bad driving habbits did it. We changed the oil twice in the last 3 months. This past friday was one of them. I also did the o2 sensor. We also did the downpipe last month. Im hoping its like what happened to my old 89 sentra. Two spark plug wires melted some and it was running on half the engine. As far as i know everything is still stock on the REX like plugs, wires, vacum lines(we have the upgraded ones.. just havent done it), etc. We have ngk plugs and wires sitting in the front seat. So far we are going to have the on base hobby shop take care of those but at www.azrx7.com i already asked for some good shops. Let me know what you guys think. All replys are GREATLY appreciated. I hope its not apex seal.. but im sure it is sadly.


PS. I forgot to mention i had that fuel smell when starting which also leads me to believe its apex... (please, nooooo!!!!!! hehe)
Old 01-04-06, 10:48 PM
  #2  
Full Member

iTrader: (1)
 
Join Date: Nov 2002
Location: Nipomo, CA.
Posts: 208
Likes: 0
Received 1 Like on 1 Post
If it's a stock motor it's hard to believe it was an apex seal with a granny type driver. Unless maybe the oil injectors are clogged so no oil was being shot in to lube the seals. What pipe are you referring to with smoke coming out? You need to find the source of the oil/smoke first. Maybe the oil lube line to the turbo is leaking is all. It's not coolant right? There is a turbo coolant line in the same area too.
Old 01-05-06, 12:01 AM
  #3  
Full Member

Thread Starter
iTrader: (1)
 
dave5678's Avatar
 
Join Date: Nov 2005
Location: Germany
Posts: 73
Likes: 0
Received 0 Likes on 0 Posts
I just took this pic...

It tries to start when you crank it... it runs for a second... 2 and the very most. Could it be carbon locked? I dont think the plugs and wires have ever been changed. We already set up an appoint with the on base hobby shop here at Davis Monthan AFB. They are towing it in the morning. We have NGK plugs and wires. Hope that does something.

Also I unscrewed the coolent filler cap and some squirted out. Its been sitting for 5-6 hours. All of it was right there at the top. Could that be the thermostat is broken? Thanks for the help!

When I changed the oil on friday I did noticed oil that was on the turbos. I didnt think nothing of it. hmmm....

Last edited by dave5678; 01-05-06 at 12:03 AM.
Old 01-05-06, 06:27 PM
  #4  
Full Member

Thread Starter
iTrader: (1)
 
dave5678's Avatar
 
Join Date: Nov 2005
Location: Germany
Posts: 73
Likes: 0
Received 0 Likes on 0 Posts
Great news... Trevor(from azrx7.com) stopped by to check it out and i was right.. its the plugs... so going to do that tomorrow. Going to buy some turbos from the classifieds here most likely... and trev's got a y pipe... so everything is really good. Thanks for the reply RX7 8U much appreciated!!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM
cdn
2nd Generation Specific (1986-1992)
14
09-10-15 06:23 AM
cdn
2nd Generation Non-Technical and pictures
0
08-11-15 08:59 PM



Quick Reply: Blown engine?



All times are GMT -5. The time now is 07:23 AM.