Blew my fd motor... what seals should i get now?
#1
Senior Member
Thread Starter
iTrader: (4)
Join Date: Oct 2010
Location: NE philadelphia
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Blew my fd motor... what seals should i get now?
just blew a corner seal on the front rotor
sending the housing to be refinished..
the car is a street weekend driver making 500whp... take to the strip sometimes... i beat on it alot though.
should i just go with oem? als? carbon fiber? what is the best but the safest ?
sending the housing to be refinished..
the car is a street weekend driver making 500whp... take to the strip sometimes... i beat on it alot though.
should i just go with oem? als? carbon fiber? what is the best but the safest ?
#3
Senior Member
Thread Starter
iTrader: (4)
Join Date: Oct 2010
Location: NE philadelphia
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
als is supposed to be good i heard but from what i have been hearing usually a corner seal goes doesnt it? im on a street port btw ... so does it make sense to put the housing into more stress?
i may be wrong lol but this is what i have been told
i may be wrong lol but this is what i have been told
#4
Sharp Claws
iTrader: (30)
corner seals have nothing to do with the apex seals and they rarely fail short of an apex seal taking out the corner seal.
maybe you're talking about the apex seal boot, which also rarely fails. what usually fails is the sharp point at the end of the long apex seal. softer seals break this spot easier.
and carbon is for non turbo use only. i believe you mean ceramic seals.
maybe you're talking about the apex seal boot, which also rarely fails. what usually fails is the sharp point at the end of the long apex seal. softer seals break this spot easier.
and carbon is for non turbo use only. i believe you mean ceramic seals.
#5
Sir Braps A lot
as stated to have corner seal failure your rotors may be a hair out of spec, check all the parts and make sure they fall into the proper measurements. as for Apex seals i like Aviation seals they work great.
#6
Senior Member
Thread Starter
iTrader: (4)
Join Date: Oct 2010
Location: NE philadelphia
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
im sorry you guys are right i broje off the tip of the apex seal ! so what kind should i get...
street used at night... drag strip once in a while... but beat on alot lol
street used at night... drag strip once in a while... but beat on alot lol
Trending Topics
#8
Original Gangster/Rotary!
iTrader: (213)
Who is porting, building and tuning your engine?
The only time I've seen a broken corner seal was due to a (very) bad build due to very out of spec tolerances, among other things.
What power levels are you making, and what kind of mileage are you putting on the car each year?
Edit: I see you chipped an apex seal. Stock I suppose? The rest of my questions still stand
The only time I've seen a broken corner seal was due to a (very) bad build due to very out of spec tolerances, among other things.
What power levels are you making, and what kind of mileage are you putting on the car each year?
Edit: I see you chipped an apex seal. Stock I suppose? The rest of my questions still stand
Last edited by GoodfellaFD3S; 10-06-11 at 06:38 PM.
#9
Senior Member
Thread Starter
iTrader: (4)
Join Date: Oct 2010
Location: NE philadelphia
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
jpr built it 5000 miles ago before i bought the car...
tuned at enzo racing...
borgwarner s366 making 500...
took the blown one to goopy and getting all there stuff put on
tuned at enzo racing...
borgwarner s366 making 500...
took the blown one to goopy and getting all there stuff put on