scott(pittsburgh)

i replaced the motor on my fd about 2 months ago, i also did a T-78 singe and all the other mods, including a PFC. when i start thew car, it shakes and won't idle till it warms up, after that, it holds an idle, but won't rev, when i give it gas, it studders and revs very rough(like on one rotor) but im getting spark and fuel on both rotors.. my Q is, could i have installed something wrong? does anyone know what it might be?
thanks

rxtasy3

iTrader: (2)

Check and make sure ur plug wires r on the right plugs.

scott(pittsburgh)

yeah, thee on the right ones.

zayrx7

check your setting in the pim volt on the pfc and check the boost sensor hose

GoodfellaFD3S

iTrader: (213)

Flatbed the car to dave at kdr (610 614 1214). The tow truck bill along with what he charges you to diagnose the problem will be much cheaper than another rebuild.

diabolical1

iTrader: (3)

what kind of motor did you replace the original motor with? used? rebuilt?