87 TII stopped running
#27
Moderator
iTrader: (1)
I believe the FPR is the last thing in line so you might want to start w/that. I gather you could remove that item and place a hose from what you removed it from then place that hose in a jug and see if the fuel flows through the system into the jug by jumpering the fuel check connector.
#28
spinning doritos
Thread Starter
Join Date: Apr 2012
Location: NH
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
yeah i just pulled the supply line and it was ok, return line off the fuel rail, nothing. i was gonna go buy a vacuum tester and apply vacuum to the regulator and see if i tried opening it with that. if it doesnt do anything if i do supply vacuum its the regulator then...correct?
#30
spinning doritos
Thread Starter
Join Date: Apr 2012
Location: NH
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
so i applied vacuum to the fuel pressure regulator, and turned the key on with the jumper attatched, no fuel out of the return. the regulator doesnt seem to like to stay anywhere between 28-37 psi and it just bleeds off to about 20-15 and then dies out....doesnt wanna stay.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM
smikels
2nd Generation Specific (1986-1992)
3
08-18-15 01:26 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM