85 rx7 timing
#1
Junior Member
Thread Starter
Join Date: Aug 2006
Location: elmira ny
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
85 rx7 timing
I just recived a new rotary 12a for my rx7. I tried timing it with haynes manuel and it stinks. anyone got the basic for me help it floods out alot at idle and starts hard hot Thanks
#2
Old Fart Young at Heart
iTrader: (6)
First, put the Haynes away and download the online FSM from the following link.
http://foxed.ca/foxed/index.php?page=rx7manual
Second, describe what problems that you're having. Vague questions elicit vague answers. I read through your other posts and they are as vague as this one. If you seriously expect any help, your questions need to be more detailed in both what the problem is and what you've done.
http://foxed.ca/foxed/index.php?page=rx7manual
Second, describe what problems that you're having. Vague questions elicit vague answers. I read through your other posts and they are as vague as this one. If you seriously expect any help, your questions need to be more detailed in both what the problem is and what you've done.
#3
Junior Member
hey
Exchanged my failed alternator to autozone after only having it for 2-3 months and while waiting for the slow service noticed that the pulley wobbled slightly when it spins, can that be caused by bad timing, a maybe bent eccentric shaft pulley, or maybe i didnt leave enough slack on the belt?
Thread
Thread Starter
Forum
Replies
Last Post
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM