80 RX7 12A Need help Holley carb
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Jun 2015
Location: Montpellier
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
80 RX7 12A Need help Holley carb
Hello. I need your help!! I'm in France and here no information about it...
I have a 450cfm Holley carb. What I must do to use it? I have allready make a adaptator plate. What kind of mods for? Jets size idle etc...
Thank you for help and sorry for my english...
I have a 450cfm Holley carb. What I must do to use it? I have allready make a adaptator plate. What kind of mods for? Jets size idle etc...
Thank you for help and sorry for my english...
Last edited by Matmo; 06-19-15 at 02:27 PM.
#2
Moderator
iTrader: (3)
welcome to the board.
is it RB-modified or off-the-shelf?
you are in for a hard uphill battle. also, since you mentioned an adapter plate, i'm assuming it's being used to run the Holley on the stock manifold, so that may make things more complicated in terms of using the information that is out there. good luck with it anyway.
try these:
https://www.rx7club.com/1st-generati...65cfm-1046393/
https://www.rx7club.com/1st-generati...m-jets-470590/
https://www.rx7club.com/1st-generati...ck-12a-358431/
is it RB-modified or off-the-shelf?
you are in for a hard uphill battle. also, since you mentioned an adapter plate, i'm assuming it's being used to run the Holley on the stock manifold, so that may make things more complicated in terms of using the information that is out there. good luck with it anyway.
try these:
https://www.rx7club.com/1st-generati...65cfm-1046393/
https://www.rx7club.com/1st-generati...m-jets-470590/
https://www.rx7club.com/1st-generati...ck-12a-358431/
Thread
Thread Starter
Forum
Replies
Last Post